UGH! The Check Engine Light Is On!

by | posted in: Ask The Expert | 0

What Should I Do If The Check Engine Light Comes On?

If your check engine light comes on, it’s important to take the following steps:

  1. Check your gas cap: A loose or damaged gas cap can cause the check engine light to come on. Make sure the gas cap is tightened securely and that there are no signs of damage.
  2. Check for other warning signs: If the check engine light is accompanied by other warning signs, such as strange noises or poor performance, it’s important to have your vehicle inspected as soon as possible.
  3. Check the owner’s manual: Your vehicle’s owner manual may provide some guidance on what to do if the check engine light comes on.
  4. Have the code scanned: The check engine light is triggered by a code stored in the vehicle’s computer system. A diagnostic scan tool can read the code, and provide an idea of what the problem might be. Many auto parts stores will perform a diagnostic scan on your vehicle for free.
  5. Have it serviced: If the problem is not obvious, it’s best to have your vehicle inspected by a qualified technician as soon as possible. This will help to prevent further damage to the engine and keep you safe on the road.

It’s important to keep in mind that the check engine light can indicate a wide range of problems, some of which are minor and some of which are serious. Ignoring a check engine light can lead to more serious problems and costly repairs.

Air Filters. Are They Important?

by | posted in: Ask The Expert | 0

Is The Air Filter In My Car Important?

Yes, the air filter in a car is important for several reasons:

  1. Engine protection: The air filter plays a crucial role in protecting the engine from dirt and debris that can enter through the air intake. The air filter is designed to trap these particles before they reach the engine, which helps to prevent damage and wear.
  2. Engine performance: A clean air filter ensures that the engine receives an adequate supply of clean air, which is necessary for proper combustion. A clogged air filter can restrict the airflow to the engine, which can reduce engine performance and increase fuel consumption.
  3. Engine longevity: Over time, dirt and debris can accumulate in the engine, which can cause wear and tear on the engine’s internal components. A clean air filter helps to prevent this accumulation and prolong the life of the engine.
  4. Emissions: A clogged air filter can increase the emissions released by the vehicle, so it’s important to keep the air filter clean to reduce the vehicle’s environmental impact.
  5. Fuel efficiency: A clean air filter helps to ensure that the engine is running efficiently, which can lead to better fuel economy and save you money on fuel costs in the long run.

It’s important to keep in mind that the air filter is a relatively inexpensive part and easy to replace, but it plays a critical role in the performance and longevity of your car’s engine.

 

How Often Should I Change My Air Filter?

The recommended frequency for changing the air filters in a car can vary depending on a number of factors, such as the make and model of the vehicle, the type of driving conditions, and the type of air filter.

As a general rule of thumb, it’s a good idea to change the air filter every 12,000 to 15,000 miles or once a year, whichever comes first. For those who drive in extreme conditions, such as dusty or dirty roads, it may be necessary to change the air filter more frequently.

It’s also important to check your vehicle’s owner manual for the specific recommendations for your make and model. Additionally, if you notice any signs of wear or problems with your engine, such as reduced power or poor fuel economy, it’s a good idea to have the air filter checked.

During an air filter replacement, a mechanic will inspect the air filter for signs of damage or clogging, and will replace it if necessary. A clogged air filter can restrict the airflow to the engine, which can reduce engine performance, increase fuel consumption and cause damage to the engine.

It’s important to keep in mind that these are general guidelines, and the specific needs of your vehicle may vary. Always consult your vehicle’s owner manual for the manufacturer’s recommendations, and keep an eye out for warning signs of air filter problems.

Tire Talk

by | posted in: Ask The Expert | 0

There are several types of tires available for vehicles, each with their own unique characteristics and performance characteristics. Here are some of the most common types of tires:

  1. Summer tires: These tires are designed for use in warm weather and provide good traction on dry and wet roads. They have a harder rubber compound that allows for better handling and stability at higher speeds.
  2. Winter Tires: These tires are designed for use in cold weather and provide good traction on snow and ice. They have a softer rubber compound that allows for better grip in colder temperatures.
  3. All-Season Tires: These tires are designed to be used year-round and provide good traction on a variety of road surfaces and weather conditions. They are a compromise between summer and winter tires, and are a good choice for drivers who live in areas with mild to moderate weather.
  4. Performance Tires: These tires are designed for high-performance vehicles and provide good traction and handling at high speeds. They have a softer rubber compound and a more aggressive tread pattern for maximum grip.
  5. Off-Road Tires: These tires are designed for use on rough, unpaved surfaces and provide good traction and durability in off-road conditions. They have deep, aggressive tread patterns and a tougher construction to withstand the demands of off-road driving.
  6. Run-Flat Tires: These tires have reinforced sidewalls that allow the tire to continue to be driven on even if it loses air pressure. This can be useful in case of a puncture, they are more expensive than regular tires and they are less comfortable to drive on.

 

The interval at which tires need to be replaced varies depending on several factors, including driving conditions, usage, and the type of tire. Here are some general guidelines for tire replacement:

  • Tread depth: Tires should be replaced when the tread depth reaches 2/32 of an inch or less. You can check the tread depth by using a penny and inserting it into the grooves of the tire. If the top of Lincoln’s head is visible, it’s time to replace the tire.
  • Age: Tires have a lifespan of around six years, after which they should be replaced, regardless of the tread depth, as the rubber can dry out and lose its elasticity, leading to a higher risk of failure.
  • Wear and tear: Tires that show signs of uneven wear, cuts, or punctures should be replaced as soon as possible.
  • Driving conditions: Tires that are used in severe conditions, such as heavy loads, high speeds, or extreme temperatures, will wear out faster than tires that are used in milder conditions.
  • Maintenance: Regularly check tire pressure and rotate tires as recommended by the manufacturer to ensure even wear and prolong the life of the tires.

 

It’s important to select the right type of tire for your vehicle based on the type of driving you will be doing, the weather conditions in your area, and your personal preferences. Consult the vehicle’s owner manual or consult with your Trinity Auto Repair team at Trinity Auto Worx for the recommended tires for your vehicle.

 

Maintaining Your Brakes

by | posted in: Ask The Expert | 0

How Often Should I Have Maintenance on My Brakes?

The recommended frequency for brake maintenance can vary depending on a number of factors, such as the make and model of the vehicle, the type of driving conditions, and the type of brake system.

As a general rule of thumb, it’s a good idea to have your brakes inspected at least once a year or every 12,000 miles, whichever comes first. Additionally, if you notice any signs of wear or problems with your brakes, such as squealing, grinding, or a soft brake pedal, you should have your brakes checked immediately.

During a brake inspection, a mechanic will check the brake pads, rotors, and brake fluid, and will also inspect the brake lines and hoses for leaks or damage. If the brake pads are worn, they will be replaced. If the brake rotors are worn, they may need to be resurfaced or replaced.

It’s important to keep in mind that these are general guidelines, and the specific needs of your vehicle may vary. Always consult your vehicle’s owner manual for the manufacturer’s recommendations, and keep an eye out for warning signs of brake problems.

What Is Engine Coolant?

by | posted in: Ask The Expert | 0

What Is Engine Coolant?

Engine coolant, also known as antifreeze, is a liquid that is mixed with water and circulated through the engine’s cooling system to help regulate the engine’s temperature.

Coolant is designed to transfer heat away from the engine, which helps to prevent overheating. It also helps to protect the engine from rust and corrosion by creating a barrier between the metal parts of the engine and the water that is used in the cooling system.

Coolant is usually made of a mixture of water, ethylene glycol or propylene glycol, and various other additives that help to protect the engine and enhance the coolant’s performance.

There are different types of coolant available like Ethylene Glycol and Propylene Glycol based coolant, Long Life coolant, and Organic Acid Technology (OAT) coolant. Each type has its own characteristics and is recommended for certain types of vehicles, so it’s important to use the correct type of coolant recommended by the vehicle manufacturer.

 

Why Is It Important To Flush My Engine Coolant?

Flushing the engine’s coolant is important for a few reasons:

  1. Preventing corrosion: Over time, the coolant can become contaminated with minerals and other debris that can cause corrosion in the cooling system. Flushing the coolant helps to remove these contaminants and prevent corrosion.
  2. Maintaining proper coolant concentration: The coolant should be mixed with water at the correct ratio to provide the best protection for your engine. Over time, the coolant can become diluted, and flushing the system will help to restore the correct concentration.
  3. Removing rust and sediment: Rust and sediment can build up in the cooling system over time, reducing the efficiency of the cooling system and potentially causing damage. Flushing the system will remove these contaminants and help to keep the engine running at a proper temperature.
  4. Maintaining the efficiency of the cooling system: Over time, the coolant may lose its ability to transfer heat, which can cause the engine to overheat. Flushing the coolant will help to restore the coolant’s ability to transfer heat and maintain the efficiency of the cooling system.

As a general rule of thumb, it’s a good idea to flush the engine coolant every 2 years, or as recommended by the vehicle manufacturer.

Timing Belt? Do I Need It?

by | posted in: Ask The Expert | 0

A timing belt is a belt that connects the crankshaft and camshaft in an internal combustion engine. Its main function is to synchronize the rotation of the crankshaft and camshaft so that the engine’s valves open and close at the correct time.

The timing belt also keeps the pistons from striking the valves and it is a crucial component that helps your engine run smoothly. Without a properly functioning timing belt, the engine could suffer damage or even seize up completely. Timing belts are typically made of rubber and are subject to wear and tear over time, so they need to be replaced at regular intervals to ensure that the engine continues to run smoothly and avoid costly engine repairs.

The interval at which a timing belt needs to be replaced varies depending on the make and model of the vehicle, and it’s important to consult the vehicle’s owner manual or consult your trusted Trinity Auto Worx team for the recommended replacement interval. It’s also important to note that in some engines, the timing belt is replaced by a timing chain which has a longer lifespan but still needs to be inspected and replaced at some point.

Why Are Oil Changes Important?

by | posted in: Ask The Expert | 0

Why are Oil Changes Important?

Oil changes are important because they help to keep an engine running smoothly by removing dirt, debris, and other contaminants from the oil. Over time, the oil in a vehicle’s engine can become contaminated with particles of dirt and metal, which can cause the engine to wear out more quickly. Additionally, as the oil gets dirty, it loses its ability to lubricate the engine effectively, which can lead to increased friction and heat, and ultimately to engine damage. Regular oil changes help to prevent these problems and prolong the life of the engine.

 

How Often Should I Change My Oil?

The recommended frequency for oil changes can vary depending on a number of factors, such as the make and model of the vehicle, the type of oil being used, and the driving conditions.

Typically, most car manufacturers recommend changing the oil every 3,000 to 5,000 miles or every 3 to 6 months (whichever comes first) for conventional oil. But for synthetic oil, it is recommended every 7,500 to 10,000 miles or every 6 to 12 months (whichever comes first).

It’s also important to check your vehicle’s owner manual for the specific recommendations for your make and model, as they may have specific recommendations. Additionally, if you drive in extreme conditions, such as hot weather or on dirt roads, or if you frequently tow heavy loads, you may need to change your oil more often.

It’s also important to keep an eye on the oil life indicator, which is found in most modern vehicles, it will tell you when it’s time for an oil change based on the mileage and usage.

 

How Do I Know When It’s Time To Change My Car’s Oil?

There are a few ways to know when it’s time to change your car’s oil:

  1. Check the owner’s manual: Most vehicle manufacturers provide recommended intervals for oil changes in the owner’s manual. Be sure to check this first.
  2. Check the oil life indicator: Many newer vehicles have an oil life indicator that displays the remaining life of the oil based on the vehicle’s usage and mileage. This indicator will typically light up or display a message when it’s time for an oil change.
  3. Check the oil level and appearance: You can check the oil level and appearance on the dipstick. If the oil is dirty, appears black and has a strong burnt smell, it’s time for an oil change. Also, if the oil level is too low, it’s time to add oil or schedule an oil change.
  4. Follow the 3,000-mile rule: As a general rule of thumb, it’s a good idea to change your oil every 3,000 miles or every 3 months, whichever comes first.

It’s important to keep in mind that these are general guidelines, and the specific needs of your vehicle may vary. Always consult your vehicle’s owner manual for the manufacturer’s recommendations.

Tesla Vehicle Maintenance

by | posted in: Ask The Expert | 0

What regular maintenance needs to be performed on a Tesla?

Tesla vehicles, like any other vehicles, require regular maintenance to ensure they continue to run smoothly and safely. However, due to the advanced electric powertrain and self-driving capabilities, the maintenance schedule for a Tesla vehicle may be different than a traditional gasoline-powered car. Here are a few maintenance tasks that should be performed regularly on a Tesla:

  1. Battery maintenance: Tesla vehicles have a large battery that stores energy to power the electric motor. It is important to keep the battery in good condition by regularly checking the battery’s state of charge and keeping the battery cool.
  2. Software updates: Tesla vehicles receive software updates over-the-air to improve performance and add new features. It is important to keep the vehicle’s software up-to-date and to be aware of the vehicle’s software version.
  3. Tire rotation and pressure check: The tires of a Tesla vehicle should be rotated and the tire pressure should be checked regularly to ensure they are properly inflated and to extend the life of the tires.
  4. Brake maintenance: The brake pads and rotors on a Tesla vehicle should be inspected regularly, and if necessary, replaced to ensure the brakes are functioning properly.
  5. Wiper blade replacement: the wiper blades should be replaced when they start to show signs of wear to ensure clear visibility in all weather conditions.
  6. Cabin air filter replacement: The cabin air filter should be replaced at regular intervals to ensure the air inside the vehicle is clean and free of pollutants.
  7. Service inspections: Tesla recommends service inspections every 12,500 miles or 12 months, whichever comes first, to check the condition of the vehicle and perform any necessary maintenance.

It’s important to keep in mind that the specific maintenance schedule for a Tesla vehicle may vary depending on the model and the type of driving conditions

Does The Fuel Type Matter?

by | posted in: Ask The Expert | 0

The main difference between gasoline for cars is the octane rating. Octane rating is a measure of a fuel’s ability to resist “knocking” or “pinging” during combustion, caused by the air/fuel mixture detonating prematurely in the engine. The higher the octane number, the greater the fuel’s resistance to knocking or pinging.

  1. Regular gasoline: This type of gasoline has an octane rating of 87, and is commonly known as “87 octane” or “unleaded gasoline”. It is the most widely available and the least expensive type of gasoline. It is suitable for most cars, but not recommended for high-performance engines.
  2. Mid-grade gasoline: This type of gasoline has an octane rating of 89, and is commonly known as “89 octane” or “plus gasoline”. It is more expensive than regular gasoline, but less expensive than premium gasoline. It is suitable for cars that require a higher octane gasoline, but not necessary for most cars.
  3. Premium gasoline: This type of gasoline has an octane rating of 91, 92 or 93, and is commonly known as “91 octane”, “92 octane” or “93 octane” or “super gasoline”. It is the most expensive type of gasoline and is typically used in high-performance and luxury vehicles.
  4. Diesel: Diesel fuel is a type of fuel that is used in diesel engines. It is different from gasoline in that it is denser, has a higher energy content and is less flammable. It is used in cars, trucks, buses, and other heavy-duty vehicles.

It is important to note that using a higher octane fuel than is recommended for your vehicle will not provide any benefit, and may actually decrease performance and increase fuel consumption. Always consult the owner’s manual or consult with Trinity AutoWorx to determine the appropriate fuel for your vehicle.

All About Spark Plugs

by | posted in: Ask The Expert | 0

Spark plugs are a critical component of the ignition system in a car’s engine. They are responsible for creating the spark that ignites the fuel-air mixture in the engine’s cylinders, which powers the car.

Each cylinder in an internal combustion engine has a spark plug, which is located at the top of the cylinder. The spark plug has a electrode at the top, which is connected to the ignition system. When the ignition system sends an electrical current to the spark plug, it creates a spark that jumps across a small gap between the electrode and a ground electrode. This spark ignites the fuel-air mixture in the cylinder, which creates the power to drive the car.

Spark plugs are designed to work under high temperatures and pressures, and they can wear out over time. As the spark plugs get older, the electrode can become worn, which can cause the spark to be less powerful. This can result in poor combustion and a decrease in engine performance.

It’s important to replace spark plugs at the recommended intervals, this can help to maintain engine performance and fuel efficiency, and prevent misfires, which can cause damage to the engine.

Some newer vehicles use Iridium or platinum spark plugs which have a longer lifespan than traditional copper spark plugs. It’s important to refer to the vehicle’s manual or your Trinity AutoWorx team to determine the appropriate spark plugs for your vehicle.

Maintaining the spark plugs in your car can help to ensure that they continue to function properly and provide the best possible performance for your engine. Here are a few things you can do to maintain your spark plugs:

  1. Check the gap: The gap between the electrode and the ground electrode on the spark plug should be set to the manufacturer’s specifications. Over time, the gap can change, which can affect the spark and engine performance. Use a spark plug gap tool to check and adjust the gap as necessary.
  2. Replace at recommended intervals: Spark plugs should be replaced at the intervals recommended by the vehicle manufacturer. These intervals can vary depending on the make and model of your vehicle, as well as your driving conditions. Consult your vehicle’s owner manual or consult your Trinity Auto Worx team for the recommended replacement interval.
  3. Check for wear: Inspect the spark plugs for signs of wear, such as a worn electrode or a buildup of carbon on the electrode. If you notice any wear, it’s a good idea to replace the spark plugs.
  4. Use the correct spark plugs: Make sure to use the spark plugs that are recommended by the vehicle manufacturer. These spark plugs are designed to work properly with your engine and will provide the best performance.
  5. Clean the spark plugs: If you notice that the spark plugs are dirty, you can clean them with a wire brush or sandpaper. Be careful not to damage the electrode when cleaning the spark plugs.
  6. Check the ignition system: If you notice that the spark plugs are worn or dirty, it’s a good idea to have the ignition system checked as well. The ignition system is responsible for sending the electrical current to the spark plugs, and a problem with the ignition system can affect the performance of the spark plugs.

By regularly checking and maintaining your spark plugs, you can help to ensure that they continue to function properly and provide the best possible performance for your engine.